Care and Maintenance of Steel Slitting Machine
The main parts of the automatic slitting machine shall be inspected before use, and lubricating oil shall be added. When the disassembly and assembly of automatic slitting machine are inspected, improper tools and unscientific operation methods are strictly prohibited. The slitter is thoroughly cleaned and inspected every two weeks; If automatic slitting machine is stopped for a longer time, all bright surfaces must be wiped clean, which is coated with anti-rust oil, and plastic cover will cover the whole machine. If the automatic slitting machine is stopped for more than 3 months, the anti-rust oil should be covered with moisture-proof paper. After the work is finished, clean the equipment carefully, wipe the exposed friction surface clean and add lubricating oil. The daily care and maintenance of the slitting machine to do the following four aspects.
Firstly, the electrical parts shall be cleaned and checked regularly, cleaning hidden dangers timely.
Secondly, the daily maintenance of the steel slitting machine shall be in place, its criterion is smooth, clean, clearing (no dust, no debris) in place, ensure that the sliding parts of the equipment in good condition.
Thirdly, it is the maintenance work, rotating parts should be stopped for regular and irregular inspection (especially real-time monitoring of wearing parts should be stopped). Implement regular adjustment, regular change, commutator and meticulous records in order to achieve the purpose of extending the service life of equipment.
Fourthly, improve the technical quality and degree of personnel for operation. About the operation that controls local should be manipulated by special person to hold the post, no allowance for anybody to do it without permission.
The following are the technical parameters of several steel slitting machine categories: The photos and products technical parameters are offered by Rishbin.
| Model No. | RS0.2-1.8 | RS0.3-3.0 | RS0.8-4.0 |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils ,AL Coils, Copper Coils Picking Oil Coils | ||
| Coil Thickness | 0.2～1.8mm | 0.3～3.0mm | 0.8～4.0mm |
| Line Speed | 0～150/300m/min | 0～150/300m/min | 0-120/200m/min |
| Coil Weight | ≤10T(15T) | ≤20T(25T) | ≤25T(30T) |
| Coil I.D | φ508mm | φ508mm | φ508,φ610,φ760mm |
| Coil O.D | ≤φ1600mm | ≤φ2000mm | ≤φ2000mm |
| Strip Width | ≥15mm | ≥25mm | ≥25mm |
| Number of Strip | 5～15 | 8～20 | 5～15 |
| Slitting Accuracy | ±0.1mm | ±0.15mm | ±0.25mm |
| Blade shaft | Ф220 | Ф240mm | Ф240mm |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control |
Heavy Gauge Slitting Line Specifications
| COIL/ROLL DETAILS | Material | HR, CR, SS, GI, PPGI, |
| Tensile Strength | δb≤550Mpa，δS≤260Mpa | |
| Coil/Roll thickness | 6-20mm | |
| Steel Coil/Roll width | 600-2500 (Max) | |
| Coil/Roll I.D | Φ500-760 mm | |
| Coil/Roll O.D | Φ2500mm (Max) | |
| Steel Coil/Roll Weight | 35T (Max) | |
|
Slitter parameters |
knife pivot diameter | Ф360 mm |
| Knife pivot material | 40Cr | |
| Blades specification | Φ360mmXφ360mmX20mm | |
| Blade material | 6CrW2Si | |
| Max slit quantity | 4 pcs (16mm) 8 pcs(8mm)(Customized) | |
| Width precision | ≤±0.05mm/2M | |
|
Other parameters |
Power | 380V/50Hz/3Ph(Customized) |
| Line speed | 0-60m/min | |
| Capacity | 450 KW | |
| Whole line Dimension | 45m(L)X10m(W) | |
| Line direction | From right to left(Face to machine) | |
| Machine color | Blue |
Light Gauge Slitting Lines
Medium Gauge Slitting Lines Specifications
| L/ROLL DETAILS | Material | HR, CR, SS, GI, PPGI, Copper |
| Tensile Strength | δb≤600Mpa，δS≤360Mpa | |
| Coil/Roll thickness | 1-10mm | |
| Steel Coil/Roll width | 500-2200 (Max) | |
| Coil/Roll I.D | Φ500-760 mm | |
| Coil/Roll O.D | Φ2000mm (Max) | |
| Steel Coil/Roll Weight | 35T (Max) | |
|
Slitter parameters |
knife pivot diameter | Ф220 mm |
| Knife pivot material | 40Cr | |
| Blades specification | Φ220mmXφ360mmX20mm | |
| Blade material | 6CrW2Si | |
| Max slit quantity | 4 pcs (4mm) 20 pcs(1mm) | |
| Width precision | ≤±0.05mm | |
|
Other parameters |
Power | 380V/50Hz/3Ph(Customized) |
| Line speed | 0-80m/min | |
| Capacity | 360 KW | |
| Whole line Dimension | 45m(L)X10m(W) | |
| Line direction | From right to left(Face to machine) | |
| Machine color | Blue |
Contact Person: Mr. Chris Ho
Tel: +86-18626315075
Fax: 86-510-85853379
